酸洗板就是熱軋板通過除磷等工序用酸洗表面得到比熱軋表面性能更好的鋼板，冷板是指在常溫狀態下軋制而成的鋼板，由于冷軋應力大，一般要經過退火工序。區別二：生產工藝不同，酸洗板是以優質熱軋薄板為原料，經酸洗機組去除氧化層、切邊、精整的過程，冷板則是在常溫下軋制而成。熱軋酸洗涂油板是汽車業需要的新鋼種，其較好的表面質量、厚度公差、加工性能，可以替代車身覆蓋件和以往用冷軋板生產的汽車零部件，由此降低原材料成本10%左右。隨著經濟的發展，汽車的生產也大幅增加，板材的使用量不斷提高，國內汽車行業許多車型的零部件原設計要求使用熱軋酸洗板，如：轎車的副車架、車輪輪輻、前后橋總成、卡車箱板、防護網、汽車大梁以及零配件等，由于國內熱軋酸洗板的供應不足，汽車廠一般用冷板或熱板代替或自行酸洗。

Acid washing plate is the steel plate with better performance than the hot rolling surface through the process of phosphorus removal. Cold plate refers to the steel plate rolled at room temperature. Due to the large stress of cold rolling plate, it generally goes through the annealing process. Difference two: the production process is different, the pickling plate is made of high quality hot rolled sheet as raw material, through the pickling unit to remove the oxide layer, cutting edge, finishing process, the cold plate is rolled at room temperature. Hot rolled pickling and coated oil plate is a new steel type needed by the automobile industry. Its good surface quality, thickness tolerance and processing performance can replace the body covering parts and the auto parts produced with cold rolled plate in the past, thus reducing the raw material cost by about 10%. With the development of economy, automobile production also increased significantly, the usage of plate, the domestic auto industry many models of the original design requirements for the use of hot rolled pickling plate, such as: car frame, wheel wheel, front and rear axle assembly, truck box, fence, car girder and spare parts, etc., due to the domestic hot rolling pickling plate supply, auto factory generally use cold plate or hot plate instead of or pickling.